Plasma/Flame Cutting Dust Collector TODC-P Series - Plasma/Flame Cutting Dust Removel





Plasma/Flame Cutting Dust Collector TODC-P Series

Model：TODC-P

Category: Plasma/Flame Cutting Dust Removel

Description：

Ultra-high negative pressure fan
American HV/TORAY filter system
Visual human-machine interface (HMI)
Industrial exterior design
Self-developed control system
Siemens motor

Consultation

product description

TODC-P series dust collector

TODC-P series dust collector is the first in the world to use gravity and downward air flow pattern to promote the self-purification process, dusty air enters the air from the top, and then out from the top of the other side, the design realizes the dust flow pattern downward "inertia settlement" dust removal principle, but also makes the dust-carrying gas flow direction consistent with the gravity direction, so that the dust is easier to settle and remove, and will not be brought back to the filter cartridge.
During the operation of the dust collector, the dusty air enters the DFT dust collector from the top inlet, through the filter cartridge, the dust is captured on the outer surface of the filter cartridge, and the clean air is released into the clean air chamber through the center of the filter cartridge, and then discharged through the outlet. When the filter cartridge is cleaned, the solid-state control timer will automatically select a pair of filter cartridges for dust removal, so the high-pressure compressed air will rush directly into the center of the filter cartridge and blow off the dust on the surface of the filter material. The dust follows the main air flow and falls down into the ash bucket under the action of gravity.The sunken flow method can eradicate the problem of secondary cleaning and improve the efficiency of dedusting.

Configuration

	TODC-12P/18P/24P
Controller	Independent R&D
HMI	LCD
Backflush valve	Pulse control
Filter	HV/Ahlstrom/TORAY / SBFEC
Protocol	EtherCAT
Energy saving(optional)	Inverter control

Technical Parameters


	TODC-12P	TODC-18P	TODC-24P
Filter material	HV/Ahlstrom/TORAY，F9
Number of Filter	12	18	24
Air volume	10000m3/h	12000m3/h	16000 m3/h
Filtration efficiency	99.99%	99.99%	99.99%
Filtering area	120M2	180M2	240M2
Air Blower	15KW Motor	18.5KW Motor	22KW Motor
Collector capacity	120L	120L	240L
Power requirements	THREE-PHASE FOUR-WIRE，380V
Air pressure request	0.6~0.7MPa, compressed air without oil and water
Unit weight	1800KG	2100KG	2300KG
Outline Dimension(mm)	A：2725，B：2215， C：2117	A：3696，B：2215， C：2194	A：4439，B：1950， C：2852
Emission concentration（mg/M3）	<10	<10	<10

Our dust collector has the following other advantages:

4.1.1 Dust collector shell:

The standard structure is made of No. 7 (5mm thick) and No. 10 steel (4mm thick). Through reinforcement, the design can withstand up to-20 inch water column (5000pa).

4.1.2 Filter cartridge bracket

Galvanized steel, unique triangular design structure, in line with the principle of mechanics; take and put the filter cartridge is convenient and simple, automatically adjust the reasonable position of the filter cartridge, so that the filter cartridge is more safe and accurate fixed in the dust removal. The screw rotation design at the top makes the filter cartridge, the filter cover and the dust collector shell strongly combined, excellent sealing performance to ensure that dusty air will not be leaked to the clean air side. The tilt under the bracket is 15 degrees, which is convenient for the filter cartridge to slip during maintenance.

4.1.3 Filter cartridge cover

The cover is a stamping molding, through the electrophoretic painting technology, the protective paint is evenly arranged on the surface of the bucket cover, ensuring that the thickness is the same, strong and beautiful, and the phenomenon of paint or bubbles will not appear within 10 years, the triangular plastic installation handle of the end cover, humanized design, can quickly rotate to install the filter cover.

4.1.4 Filter cartridge

the filter cartridge has a long service life and excellent dust collection and dust removal capacity, it is rare to require the replacement of the filter cartridge.